SURFACE CURE PRIME & CURE
Class: D Type:1 AS3799 Approved Curing Compound
CURE & PRIME - WATERBASED CURING COMPOUND is a Class D, Type 1 curing compound for use on new concrete that facilitates maximum moisture retention through 28 days curing period to maximise concrete strength & durability.
CURE & PRIME can also be generally classed as Class Z, Type 1 it comes back to interpretation of definitions.
The polymer used is a synthetic acrylic and can fit in both class descriptions.
CURE & PRIME, cures, seals, and hardens the surface of new concrete, providing increased strength and durability and improved resistance to chemicals and surface dusting, when applied by the correct method and at the recommended application rate.
The dried film, which is not particularly obvious and has minimal darkening on exposure to sunlight.
CURE & PRIME is based on an acrylic resin combined with other additives, once cured is a flexible acrylic resin with advanced adhesion and moisture barrier properties.
SURFACE CURE A is also available as an alternative AS3799 Acrylic Curing Compound if required.
ADVANTAGES OF USE
- Environmentally acceptable.
- Low Solvent - water based (not classed as Hazardous or Dangerous) Low VOC
- Complies with GREEN STAR- OFFICE DESIGN V3 IEQ-13 ( <200g/L TVOC)
- Low odour, no ventilation requirement.
- No stringent safety requirements.
- Advanced adhesion properties.
- Fast dry.
- Efficient curing of the concrete assists the Development of strength, abrasion resistance and durability.
- Reduces the likelihood of cracking or dusting at the surface.
- Easy to use, eliminates messy water curing or polythene film.