SURFACE CURE AFILM Aliphatic Alcohol

https://www.surfacecure.com.au/web/image/product.template/42106/image_1920?unique=714da66

TMR-approved evaporation retarder to be used in conjunction with Surface Cure range of curing compounds.

Not Available For Sale

  • Pack Size
  • Colour

This combination does not exist.

Product Description

A-FILM is a water based aliphatic alcohol finishing compound designed for use on plastic (freshly poured and screeded) concrete, to reduce the evaporation of water during finishing operations.
Conditions under which an evaporation retarder like A FILM is required can vary greatly in ‘appearance’ with temperature of both the day, the concrete , humidity, and wind speed all contributing.
To assist the operator in determining the necessity for A FILM use please refer to the attached chart.
If the calculated evaporation rate is above 0.75kg/m2/hour, then A FILM should be applied.

  • A-FILM will not normally interfere with subsequent toppings, tiling, render, surface coatings etc. often used in industry.
  • AFILM is not considered to be a hazardous product.
  • A-FILM is NOT a curing compound.
  • A-FILM is approved by Main Roads Qld for use on concrete castings.

*Surface Cure is a range of water based curing compounds complying with AS3799 and also approved by Main Roads. 


Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.